How to repair a tear of inflatable water slide

An inflatable water slide can be an inexpensive way to beat the heat, but there is always the possibility for a tear to occur in the material. The material and stitching of the model you purchase will make a difference regarding how easy the slide will be to repair. Cheaper material may be more prone to damage, but it can be easier to repair.

1:Determine where the hole is in the water slide. If it's a small tear, it may be hard to find. One way to easily find the hole is to spray the deflated area with soapy water. Then reinflate the slide and look for bubbles. That's where the hole is.

2:Make sure the area around the hole is dry before repairing it. Mark the hole by placing four strips of masking tape around it, making a small square.

3:Sew up the hole using a needle and strong thread. The majority of inflatable slides come with a repair kit that may include thread, a patch and glue. You can purchase a repair kit at most stores that sell inflatables.

4:Patch the area. The glue should be HH-66 glue or something similar (see References). The patch should be a least a half inch bigger than the tear. Spread a small amount of glue around the surface and attach the patch to the newly sewn hole.

5:Allow time for the patch to dry. Do not leave the inflatable outside at night; a small amount of rain or dew could disrupt the drying of the glue. If the patch fails when you try inflating the water slide again, send the slide to a professional to be repaired.

Y&G Inflatable LogoFacebook Instagram YouTuBe

Copyright @ Y&G Inflatable (Guangzhou Pangao Inflatable Co., Ltd)   粤ICP备12043169号   Partner Links: